Actions

Lease of Electrical Safety Analyzer

Action to 17.08.2011
Lease of Electrical Safety Analyzer
News - we quote lease of electrical safety tester QuadTech, model Guardian 6000Plus, for tests which meets all importart standards.

 

For customer, who are not allowed to buy a new device we offer short-time or long-time lease of electrical safety tester QuadTech, Guardian 6000Plus for making all important test for production or laboratory. Here are technical features of eletrical safety tester:

 

  • AC Hipot: Programmable Voltage 50 to 5000VAC, Leakage Current to 40mA
  • DC Hipot: Programmable Voltage 50 to 6000VDC, Leakage Current to 12mA
  • Insulation Resistance: 100kΩ to 50GΩ, Test Voltage 50 to 1000VDC
  • Ground Bond: Programmable Current to 30A, R Measurement to 510mΩ
  • Twin Port – Simultaneous Hipot and Ground Bond Testing
  • Open/Short Circuit Detection Mode
  • Programmable Hi/Lo Limits for Pass/Fail Testing
  • Ability to Perform Multiple Tests in Sequence
  • Internal Storage and Recall of 100 Test Setups, 50 Steps Each
  • Programmable Ramp, Dwell and Test Times
  • Front Panel Lockout Prevents Changes to the Test Setup
  • Automatic Offset to Zero Out Residual Current
  • Fast Cutoff and Quick Discharge of Device Under Test
  • RS-232 and I/O Interfaces Included Standard
  • IEEE-488 and Printer Interfaces Optional
  • Pause Mode Allows the Operator to Change Device Connection and Continue
  • Built-In Operator Prompted Software Calibration Routine
  • Front and Rear Panel Output Connections
  • 40 Ground Bond Testing with Optional Transformer
  • Multi-Point Testing with Optional Internal Scanner and/or External Scanners
  • CaptivATE Automation Software for G6000 Plus; Optional
  • CE, TUV Marked

    •  

    There are many application and testing standard, where is Guardian 6000Plus useful:

     

  • IEC 60601-1 Compliance & Production Testing
  • UL 60950 ITE Electrical Safety Testing
  • EN 61010 Compliance & Production Testing
  • High Voltage Testing of Electric Motors
  • Hipot Testing of Power Supplies
  • Ground Bond Verification of 3-Prong Corded Products
  • Functional Run Testing of Appliances
  • Leakage Current Testing of Medical Devices
  • Insulation Resistance Testing of Dielectrics

    •  

    All necessary accessories is available for lease unit. Tester unit is quite new (in good conditions), after calibration with certificate from accredited lab.

    Information about prices and conditions we will provide upon a request (e-mail, phone).